IBM 3270 - Page 114

Refe,r to the packing instructions that were
shipped with your unit.
If you have not saved your original cartons,
contact your IBM representative for information
on ordering replacement cartons.
Setting Up the Units at the New Location
When your IBM 3270 Personal Computer arrives
at its new location, carefully unpack it.
For setting up and cabling, refer to the
instructions in Steps 2 through 5 of this chapter.
If you have moved the 3270 PC to another
country, and if the electrical voltage in the new
country is different than the voltage shown on
the label on the back of your system unit, do not
plug it in! First, contact your IBM
representative.
Chapter 4. Moving Your 3270 PC to a New Location 4-15