IBM 5100 - Page 55

(
(
(
u v x Y Z A TAPE READ MAP
445 5 5 A
5
PAGE 43 OF 45
485
ERROR 014-- SYSTEM ERROR.
Device
not selected.
Defective
F2 (base I/O) card.
486
ERROR 013-~ SYSTEM ERROR.
Device
not attached.
Defective
F2 (base I/O) card.
487
ERROR 012-- SYSTEM ERROR.
Physical end
of tape.
Rewind the diagnostic tape.
It might not
be positioned correctly.
Defective diagnostic tape cartridge.
488
ERROR 011-- SYSTEM ERROR.
End of marked tape.
Rewind the diagnostic tape.
It might not be
positioned correctly.
Defective diagnostic tape cartridge.
489
ERROR 010-- SYSTEM ERROR.
End of file.
Rewind the diagnostic tape.
It might not be
positioned correctly.
(- Defective diagnostic tape cartridge.
490
ERROR 009--SYSTEM ERROR.
End
of data.
(" Defective diagnostic tape cartridge.
P R S T
4 4 4 4
491
MAP 0300-43
ERROR 008-- SYSTEM ERROR.
Records/signals
out of sequence
(position error).
Defective diagnostic tape cartridge.
Dirty tape head.
Service
check/adjust the cartridge stop
blocks (refer
to 224).
Defective tape control card (refer
to
202).
492
ERROR 007-- SYSTEM ERROR.
Unrecoverable data error
(CRC error)
Defective diagnostic tape cartridge.
Dirty tape head.
Service check / adjust the cartridge stop
blocks (refer
to 224).
Defective tape control card (refer
to 202).
493
ERROR 006-- SYSTEM ERROR.
File protect on. Same
as error 949.
Go to Page 22. Step 206. Entry Point F.
494
ERROR 005-- SYSTEM ERROR.
Cartridge not inserted. Same
as error 948.
Go to Page 23. Step 215. Entry Point E.
28SEP76 PN 1608386
EC 829670 PEC 828851
MAP 0300-43