Starting the ServeRAID Configuration Program
You can select Help from any menu. To return to the previous
screen or to the previous work area of a screen, press Esc. To select
a menu item, press the number of the item or use the Up Arrow (↑)
key or Down Arrow (↓) key to highlight the item, then press Enter.
SelectachoiceusingtheUpArrow()andDownArrow()keysandpressEnter.
Press Esc to return to previous menu.
Main Menu
1. Help
2. View Configuration
3. Create/Delete Array/Log Drive
4. Initialize/Synchronize Log Drive
5. Rebuild Device Management
6. Advanced Functions
7. Exit
IBM PC ServeRAID Adapter Disk Array Configuration Ver. 1.XX
Adapter Number: 1 Bus Number: 0 Host ID = Null Config
The Main Menu contains the following choices:
Help: Select this choice when you need additional information.
View Configuration: Select this choice to see the existing disk
array configuration.
Create/Delete Array/Log Drive: Select this choice to select the
drives for an array you want to create, or to delete an existing
array. This choice also allows you to define and delete a logical
drive.
Whenever you make changes to the disk-array configuration
and select Exit, the Confirm pop-up window will appear. You
must select Yes to save and activate the changes.
88 PC Server 520 User's Handbook for PCI/EISA
To Next Page
Loading...
