Starting the ServeRAID Configuration Program
The ServeRAID Adapter Main Menu
If you have more than one ServeRAID adapter installed in your
server, you will get an adapter selection screen similar to the
following before the Main Menu appears.
Multiple IBM ServeRAID Adapter found in the system. Select a choice using the Up
Arrow()andDownArrow()keysandpressEnter.
Select Adapter
1. Help
2. ServeRAID Adapter 1
3. ServeRAID Adapter 2
4. Exit
IBM PC ServeRAID Adapter Disk Array Configuration Utility Ver. 1.XX
Notes:
1. The version numbers on your screens might be different.
Some menus might differ slightly, depending on the
version that comes with your server.
2. The primary diskette drive is the first diskette drive that
your system tries to start from.
Chapter 3. Configuring the Disk Array 87
To Next Page
Loading...
