IBM 520 - Page 208

Installing Adapters
Note: If you installed an ISA or EISA adapter, you must run the
EISA Configuration program. See “Using the EISA
Configuration Diskette” on page 295 for instructions on
running this program.
Verifying Compatibility between Network Adapters and Device Drivers
If you are having trouble with the installation or operation of a
network adapter using OS/2 for SMP 2.11 and OS/2 LAN Server
4.0, ensure that the network-adapter device driver supports dual
processors.
Table 1 lists the network adapters and device drivers that support
dual processors and have been verified to work with the IBM PC
Server 520, OS/2 for SMP 2.11, and OS/2 LAN Server 4.0.
Table 1. Network Adapters and Device Drivers for PC Server 520
Network Adapter Device Driver LAN Server 4.0 MPTS
3Com TokenLink III EISA IBMTOKMP.OS2 IBM SMP Token-Ring
Network Adapter
3Com EtherLink II
3C503-16 ISA
ELNKII.OS2 3Com 3C503 EtherLink II
Adapter
3Com EtherLink III EISA ELNK3.OS2 3Com EtherLink III Family
OS/2
3Com EtherLink III ISA ELNK3.OS2 3Com EtherLink III Family
OS/2
IBM Token-Ring Network
16/4 ISA
IBMTOKMP.OS2 IBM SMP Token-Ring
Network Adapter
IBM Token-Ring 16/4
ISA-16
IBMTOKMP.OS2 IBM SMP Token-Ring
Network Adapter
IBM LAN Adapter for
Ethernet ISA
IBMENI.OS2 IBM LAN Adapter for
Ethernet
Intel TokenExpress 16S ISA OLITOK16.OS2 Use the network driver
interface specification
(NDIS) driver on the
adapter diskette
Intel EtherExpress 16C ISA EXP16.OS2 Intel EtherExpress 16
Family
SMC EtherCard Elite 16
Ultra ISA
SMC8000.OS2 Use the NDIS driver on the
adapter diskette
190 PC Server 520 User's Handbook for PCI/EISA