Installing Adapters
If OS/2 LAN Server provides a device driver for your network
adapter, use Table 1 on page 190 to determine the appropriate
device driver to select during the installation process. If OS/2 LAN
Server does not provide the device driver, use the NDIS device
driver on the diskettes that come with the adapter. (Check the
adapter documentation for installation instructions.)
What to do next?
Installing memory-module kits? — Go to “Installing
Memory-Module Kits” on page 169.
Removing memory-module kits? — Go to “Removing
Memory-Module Kits” on page 175.
Removing an adapter? — Go to “Removing Adapters” on
page 192.
Installing an internal drive? — Go to “Installing Internal Drives”
on page 197.
Removing an internal drive? — Go to “Removing Internal
Drives” on page 241.
Setting a jumper? — Go to “Changing Jumper Settings” on
page 249.
Installing a microprocessor? — Go to “Installing a
Microprocessor” on page 255.
Installing or removing a security feature? — Go to “Security
Procedures” on page 262.
No internal devices to install or remove? — Go to “Completing
the Installation” on page 266.
Installing an external option? — Go to “Connecting External
Options” on page 270.
Chapter 5. Installing Options 191
To Next Page