ISA/EISA Configuration
11. At the next screen, carefully verify that the information is
correct; then, press Enter.
12. At the Add Confirmation window, press Enter again.
13. In the next window (add), press Enter.
The adapter description appears in the selected slot.
14. Verify the installation; then press F10.
15. At the next menu, select Save and exit the configuration utility.
Note: PCI devices do not require .CFG files.
Diagnostic Files
The Diagnostic program that comes with your server is the primary
method of testing the server. Some optional devices and adapters
come with option-specific diagnostic files. These files provide a
more specialized test of the option. “Installing Additional Test
Programs” on page 360 provides additional information about
installing and using diagnostic files. Also, refer to the
documentation that came with the option for information on
installing and running option-specific diagnostics.
Device Drivers
Device drivers are programs designed to support a specific type of
hardware device. They provide instructions that enable the
computer to interact with the device, or to take advantage of a
device's special feature. The device driver might ship with the
operating system, the application program, or on the option diskette.
Not all devices require device drivers. Refer to the documentation
that came with the option for additional information.
Chapter 6. Configuring Your Server 291
To Next Page