ISA/EISA Configuration
Sample Applications
Some optional devices provide small applications or sampler files.
These applications demonstrate the capabilities of the device and
serve as software examples for programming the device. Refer to
the documentation that came with the option for additional
information.
To configure your server for an ISA or EISA adapter:
1. Read the documentation that came with the adapter.
2. Copy any files with the extension of .CFG from the option
diskette to the EISA Configuration Diskette. See “Configuration
Files” on page 289 for important information about configuring
ISA adapters.
3. Start the EISA Configuration Diskette (see “Starting the EISA
Configuration Diskette” on page 297).
4. Record the new configuration information (see “Recording EISA
Configuration Settings” on page 297).
5. Save the new configuration settings to the EISA Configuration
Diskette and to the NVRAM (see “Starting the EISA
Configuration Diskette” on page 297).
6. Set any jumpers or switches on the adapter.
7. Install the adapter in the server (see “Installing Adapters” on
page 180).
292 PC Server 520 User's Handbook for PCI/EISA
To Next Page