EISA Configuration Diskette
The Help=F1 prompt, which allows you to access the Help Menu
for screens displaying the prompt. To remove the Help Menu,
press Esc.
Recording EISA Configuration Settings
Record the configuration settings you made in Step 3, View or edit
details and Step 4, Examine switches or print report on a separate
sheet and store it in a safe place for future reference. If you have a
printer attached to your server, you can use the Print Screen key to
print these settings. The settings are helpful when you install
additional options, or if you need to have your system serviced.
Also, record the new settings each time you make changes. Be sure
to record the current configuration settings in the tables in “Installed
Device Records” on page 378.
Starting the EISA Configuration Diskette
Using a backup copy of the EISA Configuration Diskette can
prevent damage to the original diskette (see “Backing Up the EISA
Configuration Diskette” on page 295).
To start the EISA Configuration Diskette:
1. Insert the backup copy of the EISA Configuration Diskette into
the diskette drive.
2. Turn on the server, or if it is already on, shut down the
operating system and restart the server.
3. When the first screen appears, press Y. Follow the instructions
on the screen until the Main Menu, Steps in configuring your
computer, appears.
4. Use the Up Arrow (↑) or Down Arrow (↓) key to advance
through the items on the screen. Use the Tab key to select
choices on the bottom of the screen. Press the Esc key to return
to a previous menu.
5. Press Enter to make a selection.
Chapter 6. Configuring Your Server 297
To Next Page