Configuration Conflicts
You can resolve conflicts by changing either the software or the
hardware configuration.
Note: Start the EISA Configuration Diskette to view the addresses
used by your system board functions. Use the Advanced
function of Step 3, View or edit details to view the addresses
used by your adapters. (See “Using the Advanced Functions”
on page 298 for instructions.)
Changing the Software Configuration
The best way to resolve memory-address conflicts is to change the
addresses used by the application program or the device driver. To
do this, use the EISA Configuration program.
If a device driver is causing a memory-address conflict, refer to your
operating-system documentation or the documentation supplied
with the device drivers.
302 PC Server 520 User's Handbook for PCI/EISA
To Next Page