Configure/View Host Adapter Settings
To view or change the SCSI-2 controller settings, select
Configure/View Host Adapter Settings and follow the directions on
the screen. Refer to the following table for information on the
choices on this menu.
SCSI Controller Settings Description
Host Adapter SCSI ID Changes the SCSI ID of the SCSI-2 controller from its
default value of 7.
SCSI Parity Checking Enables or disables parity checking on the SCSI-2
adapter or controller. The default value is Enabled.
Host Adapter SCSI
Termination
Configures SCSI-2 adapter or controller termination.
The default value is Low On / High On.
SCSI Device
Configuration
Configures SCSI device parameters. Before you can
make updates, you must know the ID of the device
whose parameters you want to configure.
Advanced Configuration
Options
Allows you to view or change the settings for
advanced configuration options. These include:
Startable CD-ROM drive. When set to On, the
CD-ROM drive can be included as a startup
device. For this option to take effect, you must
insert a CD-ROM in the CD-ROM drive.
Init13Extensions. When set to On, these BIOS
extensions are enabled.
SCSI Disk Utility Programs
To see the SCSI device IDs or to format a drive, select SCSI Disk
Utilities from the SCSISelect Utility program menu.
To use the utility program, select a drive from the list. Read the
screens carefully before making a selection.
304 PC Server 520 User's Handbook for PCI/EISA
To Next Page