POST Error Messages
POST Message Description
0164 A change in the memory configuration occurred. Installing
memory, incorrectly installing memory, or removing memory
can cause this problem. It also can occur if a defective
memory module is disabled.
Action:
If you have just added or removed memory, you
must run the EISA Configuration Diskette and
update the EISA configuration information. If the
problem recurs, have the system serviced.
If you have not just installed memory, have the
system serviced.
0165 A change in the adapter configuration occurred. This error
generally occurs under one or more of the following
conditions:
A new adapter was installed and the system was not
reconfigured.
One or more adapters were moved to a different slot.
An adapter is failing and is no longer recognized by the
system as being installed.
Action:
If you have just added, removed, or changed the
location of an EISA or an ISA adapter, start the
EISA Configuration Diskette and update the
configuration information. If the problem recurs,
have the system serviced.
Some adapters have an additional diskette
containing a configuration file (CFG) for the
adapter. If the adapter comes with its own
configuration file, use the EISA Configuration
programs to install the file.
If you did not add, remove, or change the location
of an adapter, an adapter probably failed. Have
the system serviced.
0168 An error occurred during the testing of the real-time clock.
Action: Run the test programs to determine the cause of the
problem and the action to take. If the problem recurs,
have the system serviced.
0171 An error occurred during testing of the battery-backed
memory that stores the configuration information.
Action: Have the system serviced.
326 PC Server 520 User's Handbook for PCI/EISA
To Next Page