PeerMaster Adapter Screen Messages
110: Unable to download the firmware
Description: The device driver is not able to communicate with the
PeerMaster adapter. If this occurs when the device driver is being loaded,
it is an irrecoverable error that causes the device driver to terminate the
load process. It might help to restart the server or run your system
configuration program to check for possible system conflicts. If restarting
your server does not clear the problem, and system conflicts do not exist,
call for service.
203: Adapter diagnostics failed to complete
Description: The device driver is not able to communicate with the
PeerMaster adapter. If this occurs when the device driver is being loaded,
it is an irrecoverable error that causes the device driver to terminate the
load process. It might help to restart the computer or run your system
configuration program to check for possible system conflicts. If restarting
your computer does not clear the problem, and system conflicts do not
exist, call for service.
301: POST Flash Main Sector Checksum Failure
Action: Call for service.
302: POST was not performed - adapter restarted
Action: Call for service.
303: POST Test Sequencer Internal Failure
Action: Call for service.
304: POST Flash Boot Sector Checksum Failure
Action: Call for service.
305: POST DRAM Size Detection Failure
Action: Power down the server. Verify proper seating of the DRAM
SIMM on the adapter and try again. If failure persists, call for service.
342 PC Server 520 User's Handbook for PCI/EISA
To Next Page