Installing PeerMaster LAN Software
Create a VNET that globally includes all ports (no slots are
specifically included)
:LOAD C:\PATH\VNET.LAN
:BIND IPX VNET NET=2
(where C: is the primary drive and PATH is the directory)
Three PeerMaster Adapters - Example 1: Adding the following
commands to your AUTOEXEC.NCF file will cause your PeerMaster
adapter to form a combined network that is composed of an
8-segment VNET and four traditional networks. Cross-segment
traffic within the 8 segments of the VNET is switched by the
PeerMaster adapters. Cross-segment traffic from the VNET to a
traditional network, or between traditional network segments, is
routed internally by the server.
You can load the VNET.LAN device driver multiple times to create
multiple VNETs. The keywords to include a specific PeerMaster
adapter into a VNET are i1, i2, ... i8. The keyword i1 indicates a
request to include the PeerMaster adapter in expansion slot 1 into
the VNET being formed, i2 indicates the PeerMaster adapter in slot
2, and so forth.
The following example shows a server with three PeerMaster
adapters installed in expansion slots 1, 2, and 3.
:LOAD C:\PATH\MXPCI4BT.LAN SLOT=11
:LOAD C:\PATH\MXPCI4BT.LAN SLOT=12
:LOAD C:\PATH\MXPCI4BT.LAN SLOT=13
:LOAD C:\PATH\MXPCI4BT.LAN SLOT=14
:LOAD C:\PATH\MXPCI4BT.LAN SLOT=21 NAME=SLOT21
:LOAD C:\PATH\MXPCI4BT.LAN SLOT=22 NAME=SLOT22
:LOAD C:\PATH\MXPCI4BT.LAN SLOT=23 NAME=SLOT23
:LOAD C:\PATH\MXPCI4BT.LAN SLOT=24 NAME=SLOT24
:LOAD C:\PATH\MXPCI4BT.LAN SLOT=31
:LOAD C:\PATH\MXPCI4BT.LAN SLOT=32
:LOAD C:\PATH\MXPCI4BT.LAN SLOT=33
:LOAD C:\PATH\MXPCI4BT.LAN SLOT=34
(where C: is the primary drive and PATH is the directory)
56 PC Server 520 User's Handbook for PCI/EISA
To Next Page
Loading...
