Installing PeerMaster LAN Software
Assumptions:
1. Your PeerMaster adapters are installed and fully operational.
2. NetFinity Service or Manager for OS/2 that comes with
NetFinity are installed and fully operational. You should be
able to monitor the basic operations and configuration of your
server at this time.
To install the PeerMaster Adapter NetFinity support program files,
follow this procedure:
1. Insert the PeerMaster Server Adapter Option Diskette that
comes with your PeerMaster adapter into the diskette drive of
your OS/2 server.
2. Make the directory current where the NetFinity program files
for your PeerMaster adapter is located current, for example,
CD A:\NETFINTY\OS2
3. Change the directory so that the NetFinity default directory and
drive for installation is C:\NETFIN. Your installation may be
different.
4. Copy the program files for your PeerMaster adapter into the
NETFIN directory on the server, for example,
COPY A:. C:.
5. Restart the server to load the new program files.
Continue with “Monitoring Your PeerMaster Adapter” on page 66
to complete the installation.
Chapter 2. Installing Software 65
To Next Page
Loading...
