Arranging Your Workspace
Slot x Peer Switch Out (pps)
LAN Utilization
In either VNET switch mode or traditional adapter mode, each
active port on your PeerMaster adapter. is attached to a separate
LAN segment. The port receives data from the segment in a
promiscuous mode (accepts all frames transmitted on the LAN
segment). Each port can provide information on the actual use of
the LAN segment onto which it is attached. This information is
provided in kilobytes-per-second (KBps) and packets-per-second
(pps).
LAN Switch In
When the switching function on this port is enabled, the monitor
displays the number of packets that the switching function accepted
from the port and then forwarded to another LAN segment.
LAN Switch Out
When the switching function on this port is enabled, the monitor
displays the number of packets that the switching function
forwarded to the specified port for transmission into its segment.
Peer Switch In
When the switching function on this port is enabled, the monitor
displays the number of packets that the switching function received
from other PeerMaster adapters and forwards them to local ports for
transmission into their segments.
When the switching function on this port is enabled, the monitor
displays the number of packets that the switching function received
and forwards them to local ports for transmission onto segments
controlled by other ports.
Chapter 2. Installing Software 69
To Next Page
Loading...
