Installing PeerMaster LAN Software
1. From the Remote System Manager screen, select Add Group.
2. Select Discover System.
After communication with your server is established, an icon
(graphic symbol) will appear for your new server.
3. Double-click on the new icon.
After adding your server to the Remote System Manager, you may
use all the services on your PeerMaster adapter.
To display hardware configuration information about the
PeerMaster adapter installed in your server:
1. Select System Information.
2. Select Adapter Information.
The first time you use this feature, you will be prompted to insert
the PeerMaster Server Adapter Option Diskette into the diskette
drive of the system that has NetFinity manager installed. NetFinity
will copy the appropriate files onto the local hard disk for future
reference.
Additional System Monitors
The System Monitor Service allows you to monitor the statistical
data gathered by the programs provided with your PeerMaster
adapters. Expansion slot numbers are used to select a specific
PeerMaster adapter to monitor. Pseudo slot numbers are used to
select a specific port to monitor. Pseudo slot numbers are expressed
as two-digit, decimal numbers, xy, where x is the expansion-slot
location of the target PeerMaster adapter and y is the target port on
the adapter. For example, a pseudo slot number of 23 represents
port 3 of the PeerMaster adapter in slot 2.
The following monitor windows are currently provided:
Slot xy LAN Utilization (pps)
Slot xy LAN Utilization (KBps)
Slot xy LAN Switch In (pps)
Slot xy LAN Switch Out (pps)
Slot x Peer Switch In (pps)
68 PC Server 520 User's Handbook for PCI/EISA
To Next Page
Loading...
