IBM 6400 - Page 26


10 Operator’s Guide
Enter
This key operates only in NOT READY
state. Press Stop to place the printer
in the NOT READY state. (See
page 15.)
1) In program state, moves to a
lower
level in the menu structure.
2) In the “unlocked” program state,
selects a configuration option
value.
3) In program state, starts and stops
a Print Test selected from the
Operator Print Tests menu.
4) In the NOT READY state, pressing
Stop + Enter perfoms a soft reset of
the printer.
Return
This key operates only in NOT
READY state. Press Stop to place
the printer in the NOT READY
state. (See page 15.)
In the program state, moves to a
higher level in the menu structure.
Enter
Return