25Operator’s Guide
Pull the paper above and
behind the ribbon mask. (Refer
to the ribbon path diagram on
the shuttle cover.)
Load the paper on the left
tractor and close the tractor
door.
You should not normally need
to adjust the position of the left
tractor.
If adjustment is necessary,
unlock the left tractor. Slide the
tractor until its inner edge is
aligned with the number “1” on
the paper scale and lock it.
(You can also use the paper
scale to count columns.)
<3> To avoid damage to the printer
caused by printing on the platen, always
align the edge of the left tractor door
with the number “1” on the paper scale.
Paper Scale
Tractor Door
Ribbon Path
Diagram
Paper
To Next Page
Loading...
