Blower module
Blower error
LEDs
The LED on each blower provides status information about the blower. For
additional information, see the Hardware Maintenance Manual and Troubleshooting
Guide. This amber LED is lit and stays lit when an error has been detected in the
blower. The system-error LEDs on the BladeCenter system LED panels are also lit.
Management module
See the documentation that comes with the management module or the advanced
management module for a description of the connectors and LEDs on the module.
Note: Only advanced management modules can be installed in a BladeCenter E
Type 8677 unit configured with 2320-watt power modules.
18 BladeCenter E Type 8677: Installation and User’s Guide
To Next Page
Loading...
