7014-T00 and 7014-T42 service clearances and caster location
Use the service clearances and caster locations for 7014-T00 and 7014-T42 racks to plan the correct
service clearances and caster locations for your rack.
Service clearances
Table 42. Service clearances for 7014-T00, 7014-T42, and 0553 racks
Front Rear Sides
915 mm (36 in.) 915 mm (36 in.) 915 mm (36 in.)
Note: Recommended minimum vertical service clearance from the floor is 2439 mm (8 ft).
Figure 4 on page 34 provides the caster and leveler locations for 7014-T00 and 7014-T42 racks.
Site and hardware planning 33
To Next Page
Loading...
Need help?
General
