FlashSystem 900 Product Guide 20
Interface port Total IOPS:
z
The Total Port IOPS graph displays average number of read, write, and total IOPS over the sample
period. There is one line on the graph for each port in each host adapter in each canister. Each
adapter has a different color, and all four ports on an adapter have the same color.
Interface port Total Queue Depth:
z
The Total Port Queue Depth graph displays the average number of operations of that type over the
sample period. There is one line on the graph for each port in each host adapter in each canister.
Each adapter has a different color, and all four ports on an adapter have the same color.
Command-line interface
The CLI provides support for the following tasks:
Managing users
z
Configuring event notifications
z
Configuring Call Home
z
Configuring network settings
z
Configuring hosts interface I/O ports
z
Configuring a logical unit (volume)
z
Setting access policies
z
Backing up configuration settings
z
Restoring configuration settings
z
Supported platforms
IBM FlashSystem 900 supports a wide range of operating systems (Windows Server 2003 and 2008,
Linux, and IBM AIX®), hardware platforms (IBM System x®, IBM Power Systems™, and x86 servers not
from IBM), HBAs, and SAN fabrics. For specific information, see the IBM System Storage Interoperation
Center (SSIC) at:
http://www.ibm.com/systems/support/storage/ssic/interoperability.wss
To Next Page
Loading...
Need help?
General
