Need help?Do you have a question about the IBM Storwize V5100 MTM 2078-424 and is the answer not in the manual?
General| Model | Storwize V5100 |
|---|---|
| MTM | 2078-424 |
| Category | Disk array system |
| Form Factor | 2U |
| Number of Controllers | 2 |
| Maximum Host Ports | 8 |
| Drive Types | SSD |
| RAID Levels Supported | RAID 0, 1, 5, 6, 10 |
| Host Interface | 1 Gbps iSCSI, 10 Gbps iSCSI |
| Cache Memory | 16 GB |
| Cache per Controller | Up to 8 GB |
| Power Supply | Dual redundant power supplies |
| Operating System Support | AIX, Linux, Windows, VMware |
Procedure for unpacking the main control enclosure and its components.
Steps to install support rails for the control enclosure in a rack.
Procedure to install the control enclosure into the rack.
Steps to install support rails for 2U expansion enclosures.
Procedure to install a 2U SAS expansion enclosure.
Procedure to install support rails for specific expansion enclosures.
Procedure to install a 5U SAS expansion enclosure into the rack.
Steps to connect and initialize the control enclosure using a technician port.
High-level tasks for initial system setup via the management GUI.
Install necessary support rails for the new expansion enclosure.
Use the management GUI to add the new expansion enclosure to the system.
Install support rails for the new control enclosure in the rack.
Physically install the new control enclosure into the rack.
Use the management GUI to add the new control enclosure to the system.
To Next Page
