IBM Storwize V5100 MTM 2078-424 - Install the Inner Connector of the Upper CMA to the Inner Member of the Support Rail; Install the Outer Connector of the Upper CMA to the Outer Member of the Support Rail; Connectors for the Cable Management Arm

Figure 50. Connectors for the cable management arm
1 Inner connector on upper CMA
2 Connector base on inner rail member
3 Outer connector on upper CMA
4 Connector base on outer rail member
5 Support rail connector on upper CMA
6 Connector base on outer rail member
2. Install the inner connector of the upper CMA assembly ( 1 ) to the inner member of the left support rail
( 2 ), as shown in Figure 51 on page 53.
Figure 51. Install the inner connector of the upper CMA to the inner member of the support rail
3. Install the outer connector of the upper CMA assembly ( 3 ) to the outer member of the left support rail
( 4 ), as shown in Figure 52 on page 53.
Figure 52. Install the outer connector of the upper CMA to the outer member of the support rail
Chapter 2. Installing the system hardware
53