IBM H SERIES RS/6000 - Page 280

menus (continued)
Function Select 7-31
general user 3-4
Link Verification service aid 7-38
privileged user 3-6
service processor 3-3
service processor call-in/call-out
setup 3-16
service processor call-out policy
setup 3-20
service processor customer account
setup 3-21
service processor language
selection 3-15
service processor reboot policy
setup 3-22
service processor serial port
selection 3-17
service processor serial port speed
setup 3-18
service processor setup 3-8
service processor system
information 3-13
service processor system power
control 3-12
service processor telephone
setup 3-18
Set Service Mode service aid 7-33
SSA Service Aids 7-31
support menus
service processor menus 3-2
service processor service
aids 3-2
SMS 3-2
microcode
maintenance 7-55
missing disk drive module 7-40
mode, set service 7-33
modem
configuration file selection C-2
modem (continued)
configurations C-1
seamless transfer C-6
modem_f.cfg, sample file C-19
modem_f0.cfg, sample file C-22
modem_f1.cfg, sample file C-25
modem_z.cfg, sample file C-15
modem_z0.cfg, sample file C-17
modes of operation
online diagnostics 6-9
module, disk drive
1.12 GB, 2.25 GB, and 4.51
GB 7-56
broken loop 7-50, 7-52
finding the physical location 7-54
Format Disk service aid 7-43
identification 7-27
missing 7-40
power-on self-tests (POSTs) 10-1
serial number 7-27
strings 7-26
unavailable to the using
system 7-33
module, fast-write cache 7-56
mouse
using 2-7
multiboot 4-6
N
network information, SSA 7-41
NVRAM 3-14
O
OK D-2
online diagnostics
concurrent mode 6-10
maintenance mode 6-11
service mode 6-9
X-4 RS/6000 Enterprise Server Model H Series User's Guide