Need help?Do you have a question about the IBM RS/6000 7043 260 and is the answer not in the manual?
General| Category | Server |
|---|---|
| Processor Speed | 200 MHz |
| Number of Processors | 1 |
| Memory Type | SDRAM |
| Maximum Memory | 1 GB |
| Operating System | AIX |
| Form Factor | Tower |
| Model | RS/6000 7043 260 |
| RAM | 64MB |
| Storage | 4.5 GB SCSI |
Illustrates the physical locations of components within the system unit.
Provides a checklist for performing a service inspection on the system unit.
Details mechanical, environmental, and power specifications for the server.
Provides a table of contents for quick troubleshooting of common problems.
A procedure for diagnosing problems when error codes are unavailable or diagnostics cannot be loaded.
Troubleshooting steps for system halts occurring at memory checkpoints.
Procedure to locate power-related problems within system units.
Procedure to isolate defective FRUs by running diagnostics on a minimally configured system.
Lists firmware and POST error codes, their descriptions, and possible failing FRUs.
Cross-references Service Request Numbers (SRNs) to FRUs for I/O board PCI and ISA buses.
Provides a table correlating AIX location codes with physical locations.
Describes accessing system information and performing tasks via a graphical interface.
Details accessing system information and tasks via an ASCII terminal interface.
Provides precautions for handling static-sensitive components to prevent damage.
Outlines the correct procedure for shutting down the system unit before servicing.
Step-by-step instructions for removing and replacing memory cards.
DANGER and removal procedure for the system's power supply unit.
To Next Page