Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
051B Timeout, no action detected. Reinitialize the operation.
No action was detected for the installation or removal of disk unit 12, and
the bus was released.
You must reinitialize the operation to continue.
051C Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of device 3, and the
bus was released.
You must reinitialize the operation to continue.
051D Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K15,
and the bus was released.
You must reinitialize the operation to continue.
051E Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K16,
and the bus was released.
You must reinitialize the operation to continue.
051F Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of device 4, and the
bus was released.
You must reinitialize the operation to continue.
0700 Timeout, no action detected. Reinitialize the operation
Disk unit 1 was powered off but not removed.
Concurrent maintenance informational reference code.
0701 Timeout, no action detected. Reinitialize the operation
Disk unit 2 was powered off but not removed.
Concurrent maintenance informational reference code.
0702 Timeout, no action detected. Reinitialize the operation
Disk unit 3 was powered off but not removed.
Concurrent maintenance informational reference code.
You must reinitialize the operation to continue.
0703 Timeout, no action detected. Reinitialize the operation.
Disk unit 4 was powered off but not removed.
Concurrent maintenance informational reference code.
0704 Timeout, no action detected. Reinitialize the operation.
Disk unit 5 was powered off but not removed.
Concurrent maintenance informational reference code.
1xxx
82
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference Codes)
To Next Page
Loading...
Need help?
General