IBM iSeries 270 Hardware Problem Analysis And Isolation

Value for EEEE Value for AAAAAAAA Recommended Service Action:
2108 DDD00032
A command to the IOP at DSA IIIIIIII
timed out. It is not known whether the
timeout was due to a problem with
the IOP, with the storage IOA, with
the load source device unit, or with
the device interface. Reseat or
replace the load source device, the
storage IOA, followed by the IOP.
2108
DDD00037, DDD00038,
DDD00039,
DDD0003A
IPL command time out.
The load source IOP failed to respond
to a Unit Reset command in the given
time. The DSA of the load source IOP
is in IIIIIIII (word 7), in control panel
function 13. Replace the load source
IOP.
2108 00300002
IPL command time out.
The load source device failed to
respond to the first storage IOA in the
given time. The device unit address is
in DDDDDDDD (word 8). Replace the
load source device unit or isolate a
problem on that device interface.
2109 00240000, 00410000
Load source interface error.
The load source device failed to
complete a command successfully.
The device unit address is
DDDDDDDD (word 8). Replace the
load source device unit or isolate a
problem on that device interface.
2109 DDD0003B
Load source interface error.
No IOP was found on Bus 1. Use
symbolic FRU “IPLINTF” on page 350
to fix the problem.
216 iSeries: iSeries Server 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Hardware Problem Analysis and
Isolation

IBM iSeries 270 Specifications

General

Brand	IBM
Model	iSeries 270
Category	Server
Language	English