Failing item code Description/Action
FI00871 continued FI00871 indicates that the attached tape device is the failing item.
v 6387 - Internal 1/4 inch cartridge drive with SLR100 on the front cover.
– For Models 270 and 820 system units use P/N 04N2567
– For Models 830, 840, 870, 890, SB2, and SB3 system units use P/N 53P2650
– For FC 5065, 5066, 5074, 5079 expansion towers use P/N 53P2650
v
7207 Model 122 - External 1/4 inch cartridge drive with QIC-4GB-DC on the door, P/N
59H4434.
v 7208 Model 342 - External 8mm tape drive; refer to the device service information to
determine the part number(s) to replace.
v 7208 Model 345 - External 8mm tape drive; refer to the device service information to
determine the part number(s) to replace.
v 7239 Model 308 - External 1/4 inch cartridge tape library; refer to the device service
information to determine the part number(s) to replace.
v 9348 - External 1/2 inch reel tape unit. Is one of the following status codes displayed
anywhere on the 9348 control panel? (x = any number)
– Exxx
– Fxxx
– ***xx
– ******
- No: Refer to the 9348 Service Information and use the ″Running Diagnostic Tests″
procedure to run Diagnostic Test 1. If the test fails, use the 9348 Service Information
to determine the failing items.
- Yes: Use the ″Status Codes″ section of the 9348 Service Information to determine
the failing items.
v
Other device type: Refer to the device’s service information to determine the part number
or part numbers that need to be replaced.
FI00872 FI00872 indicates that the interface is the failing item.
v Internal device: See FI01140 (See page 267).
v External device: See EXTSCSI
Analyze hardware problems 263
To Next Page
Loading...
Need help?
General