IBM iSeries 270 Hardware Problem Analysis And Isolation

v No: Continue with the next step.
v Yes: Exchange Processor 2. See symbolic FRU “CCIN” on page 303 for the correct part.
This ends the procedure.
20.
Is the SRC 1xxx 8415?
v No: Continue with the next step.
v Yes: Exchange Processor 3. See symbolic FRU “CCIN” on page 303 for the correct part.
This ends the procedure.
21.
Is the SRC 1xxx 8416?
v No: Continue with the next step.
v Yes: Exchange Processor 4. See symbolic FRU “CCIN” on page 303 for the correct part.
This ends the procedure.
22. Is the SRC 1xxx 8423?
v No: Continue with the next step.
v Yes: Exchange Processor 1. See symbolic FRU “CCIN” on page 303 for the correct part.
This ends the procedure.
23.
Is the SRC 1xxx 8424?
v No: Continue with the next step.
v Yes: Exchange Processor 2 .See symbolic FRU “CCIN” on page 303 for the correct part.
This ends the procedure.
24. Is the SRC 1xxx 8425?
v No: Continue with the next step.
v Yes: Exchange Processor 3. See symbolic FRU “CCIN” on page 303 for the correct part.
This ends the procedure.
25. Is the SRC 1xxx 8426?
v No: Go to “Starting point for all problems” on page 2.
This ends the procedure.
v Yes: Exchange Processor 4. See symbolic FRU “CCIN” on page 303 for the correct part.
This ends the procedure.
Instructions for Models 870 and 890
1. Is the SRC 1xxx 8401?
v No: Continue with the next step.
v Yes: Exchange the control panel. See symbolic FRU “CTLPNL” on page 323 for the correct part.
This ends the procedure.
2. Is the SRC 1xxx 8402?
v No: Continue with the next step.
v Yes: Prior to exchanging any parts, verify that the processor VPD cards are installed. If you are in
test mode and have removed the processors VPD cards, disregard this SRC. Otherwise, correct
the processor VPD cards. If the processor VPD cards are installed correctly, then exchange the
following parts:
– M41 Network Interface card (see Symbolic FRU “CCIN” on page 303 for the correct part).
– Cable connecting the system unit and the FC 9094
This ends the procedure.
3. Is the SRC 1xxx 8403?
v No: Continue with the next step.
v Yes: Exchange the following parts:
– Tower card (See symbolic FRU “TWRCARD” on page 470 for the correct part.)
488 iSeries: iSeries Server 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Hardware Problem Analysis and
Isolation

IBM iSeries 270 Specifications

General

Brand	IBM
Model	iSeries 270
Category	Server
Language	English