EasyManuals Logo

IBM iSeries 800 Analyze Hardware Problems (System Reference Codes

IBM iSeries 800
306 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #103 background imageLoading...
Page #103 background image
Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
6718 Regulator fault
Regulator 1 reported a fault.
Fault tolerance may allow continued system operation.
PWRREG
BKSPCN
671A Regulator fault PWRREG
BKSPCN
FI00030
6738 Regulator fault
Regulator 2 reported a fault.
Fault tolerance may allow continued system operation.
PWRREG
BKSPCN
673A Regulator fault
Regulator 18 reported a fault.
Fault tolerance may allow continued system operation.
PWRREG
BKSPCN
FI00030
6758 Regulator fault
Regulator 3 reported a fault.
Fault tolerance may allow continued system operation.
PWRREG
ACMODUL
6818 One of the regulators has reported a fault
A fault detection failure occurred for a regulator. The regulator or the ac
module/SPCN card can cause this fault.
PWRREG
BKSPCN
6918 One of the regulators has reported a fault
An over current fault detection failure occurred for a regulator. The
regulator or the ac module/SPCN card can cause this fault.
PWRREG
BKSPCN
6A18 Regulator Fault
A regulator fault detection failure occurred for regulator 1. The ac module
or the regulator can cause this fault.
PWRREG
BKSPCN
BACKPLN
6A38 Regulator Fault
A regulator fault detection failure occurred for regulator 2. The regulator or
the ac module/SPCN card can cause this fault.
PWRREG
BKSPCN
BACKPLN
6A58 Regulator Fault
A regulator fault detection failure occurred for regulator 3. The regulator or
the ac module/SPCN card can cause this fault.
PWRREG
ACMODUL
BACKPLN
6B00 Disk Unit 1 regulator fault
The regulator that powers disk unit 1 reported a fault.
DISKTRY
DISKDRV
BKSPCN
6B01 Disk Unit 2 regulator fault
The regulator that powers disk unit 2 reported a fault.
DISKTRY
DISKDRV
BKSPCN
6B02 Disk Unit 3 regulator fault
The regulator that powers disk unit 3 reported a fault.
DISKTRY
DISKDRV
BKSPCN
6B03 Disk Unit 4 regulator fault
The regulator that powers disk unit 4 reported a fault.
DISKTRY
DISKDRV
BKSPCN
1xxx
System Reference Codes 99

Table of Contents

Other manuals for IBM iSeries 800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM iSeries 800 and is the answer not in the manual?

IBM iSeries 800 Specifications

General IconGeneral
BrandIBM
ModeliSeries 800
CategoryServer
LanguageEnglish

Related product manuals