IBM iSeries 810 - Page 103

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
6718 Regulator fault
Regulator 1 reported a fault.
Fault tolerance may allow continued system operation.
PWRREG
BKSPCN
671A Regulator fault PWRREG
BKSPCN
FI00030
6738 Regulator fault
Regulator 2 reported a fault.
Fault tolerance may allow continued system operation.
PWRREG
BKSPCN
673A Regulator fault
Regulator 18 reported a fault.
Fault tolerance may allow continued system operation.
PWRREG
BKSPCN
FI00030
6758 Regulator fault
Regulator 3 reported a fault.
Fault tolerance may allow continued system operation.
PWRREG
ACMODUL
6818 One of the regulators has reported a fault
A fault detection failure occurred for a regulator. The regulator or the ac
module/SPCN card can cause this fault.
PWRREG
BKSPCN
6918 One of the regulators has reported a fault
An over current fault detection failure occurred for a regulator. The
regulator or the ac module/SPCN card can cause this fault.
PWRREG
BKSPCN
6A18 Regulator Fault
A regulator fault detection failure occurred for regulator 1. The ac module
or the regulator can cause this fault.
PWRREG
BKSPCN
BACKPLN
6A38 Regulator Fault
A regulator fault detection failure occurred for regulator 2. The regulator or
the ac module/SPCN card can cause this fault.
PWRREG
BKSPCN
BACKPLN
6A58 Regulator Fault
A regulator fault detection failure occurred for regulator 3. The regulator or
the ac module/SPCN card can cause this fault.
PWRREG
ACMODUL
BACKPLN
6B00 Disk Unit 1 regulator fault
The regulator that powers disk unit 1 reported a fault.
DISKTRY
DISKDRV
BKSPCN
6B01 Disk Unit 2 regulator fault
The regulator that powers disk unit 2 reported a fault.
DISKTRY
DISKDRV
BKSPCN
6B02 Disk Unit 3 regulator fault
The regulator that powers disk unit 3 reported a fault.
DISKTRY
DISKDRV
BKSPCN
6B03 Disk Unit 4 regulator fault
The regulator that powers disk unit 4 reported a fault.
DISKTRY
DISKDRV
BKSPCN
1xxx
System Reference Codes 99