EasyManua.ls Logo

IBM iSeries 810 - Page 28

IBM iSeries 810
306 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
0700 Timeout, no action detected. Reinitialize the operation
Disk unit 1 was powered off but not removed.
Concurrent maintenance informational reference code.
0701 Timeout, no action detected. Reinitialize the operation
Disk unit 2 was powered off but not removed.
Concurrent maintenance informational reference code.
0702 Timeout, no action detected. Reinitialize the operation
Disk unit 3 was powered off but not removed.
Concurrent maintenance informational reference code.
You must reinitialize the operation to continue.
0703 Timeout, no action detected. Reinitialize the operation.
Disk unit 4 was powered off but not removed.
Concurrent maintenance informational reference code.
0704 Timeout, no action detected. Reinitialize the operation.
Disk unit 5 was powered off but not removed.
Concurrent maintenance informational reference code.
0705 Timeout, no action detected. Reinitialize the operation.
Disk unit 6 was powered off but not removed.
Concurrent maintenance informational reference code.
0706 Timeout, no action detected. Reinitialize the operation.
Disk unit 7 was powered off but not removed.
Concurrent maintenance informational reference code.
0707 Timeout, no action detected. Reinitialize the operation.
Disk unit 8 was powered off but not removed.
Concurrent maintenance informational reference code.
0708 Timeout, no action detected. Reinitialize the operation
Disk unit K1 was powered off but not removed.
Concurrent maintenance informational reference code.
0709 Timeout, no action detected. Reinitialize the operation
Disk unit K2 was powered off but not removed.
Concurrent maintenance informational reference code.
070A Timeout, no action detected. Reinitialize the operation
Disk unit K3 was powered off but not removed.
Concurrent maintenance informational reference code.
1xxx
24
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference Codes)

Table of Contents

Other manuals for IBM iSeries 810

Related product manuals