Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
0509 Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K2, and
the bus was released.
You must reinitialize the operation to continue.
050A Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K3, and
the bus was released.
You must reinitialize the operation to continue.
050B Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K4, and
the bus was released.
You must reinitialize the operation to continue.
050C Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K5, and
the bus was released.
You must reinitialize the operation to continue.
050D Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K6, and
the bus was released.
You must reinitialize the operation to continue.
050E Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K7, and
the bus was released.
You must reinitialize the operation to continue.
050F Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K8, and
the bus was released.
You must reinitialize the operation to continue.
0510 Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K9, and
the bus was released.
You must reinitialize the operation to continue.
0511 Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K10,
and the bus was released.
You must reinitialize the operation to continue.
1xxx
80
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference Codes)