IBM iSeries 810 Hardware Problem Analysis And Isolation

Failing item code Description/Action
FI00727 FI00727 indicates that one of the IOAs attached to either a combined function I/O processor
(CFIOP), multiline communications IOP or an Integrated xSeries
(TM)
Server (IXS) for
iSeries
(TM)
server is the failing item.
Perform Bus-PIP5 to isolate the failing IOA.
FI00728 FI00728 indicates that the local communications cable (RS449/V.36 interface) is the failing
item.
Check the communications cable for the part number.
FI00730 FI00730 indicates that the Licensed Internal Code module for an I/O card may be the failing
item.
Ask your next level of support for assistance.
FI00731 This failing item is in a migrated tower. See the failing item table for this failing item in the
Migrated Expansion Tower Problem Analysis, Repair and Parts manual on the V5R1
Supplemental Manuals web site .
FI00732 This failing item is in a migrated tower. See the failing item table for this failing item in the
Migrated Expansion Tower Problem Analysis, Repair and Parts manual on the V5R1
Supplemental Manuals web site .
FI00733 This failing item is in a migrated tower. See the failing item table for this failing item in the
Migrated Expansion Tower Problem Analysis, Repair and Parts manual on the V5R1
Supplemental Manuals web site .
FI00734 This failing item is in a migrated tower. See the failing item table for this failing item in the
Migrated Expansion Tower Problem Analysis, Repair and Parts manual on the V5R1
Supplemental Manuals web site .
FI00735 This failing item is in a migrated tower. See the failing item table for this failing item in the
Migrated Expansion Tower Problem Analysis, Repair and Parts manual on the V5R1
Supplemental Manuals web site .
FI00741 FI00741 indicates that the telephone cable to the wall outlet is the failing item.
Check the cable for the part number.
FI00742 FI00742 indicates that the communications coupler is the failing item.
Check the coupler for the part number.
FI00751 FI00751 indicates that the Licensed Internal Code module is the failing item.
Ask your next level of support for assistance.
FI00810 FI00810 indicates that the magnetic tape is the failing item.
Exchange the magnetic tape.
FI00830 FI00830 indicates that the external signal cable is the failing item.
See EXTSCSI for cable part numbers.
FI00832 FI00832 indicates that the external signal cable is the failing item.
See EXTSCSI for cable part numbers.
FI00841 FI00841 indicates that the terminating plug for the attached device is the failing item.
v For tape devices—see FI00880
260 iSeries: iSeries Server 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Hardware Problem Analysis and
Isolation

IBM iSeries 810 Specifications

General

Brand	IBM
Model	iSeries 810
Category	Server
Language	English