To Next Page

To Previous Page

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item

6907 High Speed Link (HSL) I/O bridge failure

LIC detected invalid data in the HSL I/O bridge VPD. The bridge and HSL

loop may not have become operational.

For this reference code the failing item list presented in the ″Service Action

Log″ can be different from the failing item list documented here. That is

due to the differences in system models and features installed.

If the ″Service Action Log″ is available then use the failing item list

presented there for servicing this reference code.

If the ″Service Action Log″ is not available then use the failing item list

documented here. By following the procedures in the symbolic FRUs listed

here you will isolate to the correct FRU list based on system model and

features installed.

NOTE: A fiber optic cleaning kit may be required for optical HSL

connections.

SIIOADP

OPT_CLN

6908 High Speed Link (HSL) I/O bridge failure

LIC data in the I/O bus vpd could not be accessed. The I/O Bus identified

in the SRC may not have become operational.

If there is a B600 6906 reference code, close this problem in the SAL and

work the 6906 error.