IBM iSeries Series Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
3002 Addressed device is not responding FCPORT
FCDEV
FCIOA
FCINTF
OPT_CLN
3010 Disk device returned wrong response to IOP FCDEV
FCIOA
OPT_CLN
3020 Storage subsystem configuration error
If an MES is being installed, verify the configuration.
FCDEV
FCIOA
OPT_CLN
3029 A device replacement has occurred
No action required. This reference code is logged for information only.
3100 Fibre Channel interface error occurred FCINTF
FCDEV
FCIOA
OPT_CLN
3109 IOP timed out a disk command FCDEV
FCINTF
FCIOA
OPT_CLN
34FF Format in progress
The device indicated that a format is in progress. When the format is
complete, the device should be useable. No action is required. This
reference code is logged for information only.
FFF3 Disk media format bad FCDEV
FFF4 Disk device problem FCDEV
FFF5 Disk sector read error FCDEV
FFF6 Disk device detected recoverable error
A disk unit service action is recommended only if the Service Action Log
contains an entry for this reference code. For more information about the
Service Action Log, see “Hardware Service Manager” in the iSeries Service
Functions.
FCDEV
FFFA Disk device wrong response was recovered by the IOP
A disk unit service action is recommended only if the Service Action Log
contains an entry for this reference code. For more information about the
Service Action Log, see “Hardware Service Manager” in the iSeries Service
Functions.
FCDEV
FCIOA
OPT_CLN
FFFE Temporary Fibre Channel interface error
A disk unit service action is recommended only if the Service Action Log
contains an entry for this reference code. For more information about the
Service Action Log, see “Hardware Service Manager” in the iSeries Service
Functions.
FCINTF
FCDEV
FCIOA
OPT_CLN
Table 2. Disk Unit Failing Items Details
Failing Item Description Document Description
FCDEV Fibre Channel device Problem Analysis; Symbolic FRU Isolation
2105
138
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)

IBM iSeries Series Specifications

General

Brand	IBM
Model	iSeries Series
Category	Server
Language	English