To Next PageTo Next Page
Need help?Do you have a question about the IBM x3550 - System - 7978 and is the answer not in the manual?
General| Processor | Intel Xeon |
|---|---|
| Processor Speed | Up to 3.0 GHz |
| Number of Processors | 1 or 2 |
| Chipset | Intel 5000P |
| Memory | Up to 32 GB DDR2 |
| Storage | SAS or SATA |
| Drive Bays | Up to 6 |
| Network Interface | Dual Gigabit Ethernet |
| Power Supply | 670W or 835W redundant power supplies |
| Operating System Support | Windows Server, Linux, VMware |
Contains documentation in PDF format and includes a browser tool for quick information access.
Lists the minimum hardware and software needed to use the IBM System x Documentation CD.
Instructions on how to browse, read, and view documents using the provided browser.
Provides a summary of the server's key features and technical specifications.
Explains the meaning and usage of caution and danger statements within the document.
Illustrates and labels the main physical components of the IBM System x3550 server.
Provides safety and general advice before proceeding with installing server options.
Outlines requirements to ensure proper system cooling and overall reliability.
Details precautions for safely performing tasks inside a powered-on server.
Provides instructions to prevent damage to components from electrostatic discharge.
Step-by-step instructions for safely removing the server's outer cover.
Instructions for removing internal air baffles to access components.
Guide for installing hard disk drives, including types supported and configurations.
Detailed steps for installing SAS or SATA hot-swap hard disk drives.
Detailed steps for installing simple-swap SATA hard disk drives.
Instructions for replacing PCI Express riser-card assemblies.
Steps for installing various adapter cards into the server's PCI slots.
Procedure for replacing the ServeRAID SAS controller in supported models.
Guide for installing DIMM memory modules, including compatibility and sequence.
Detailed steps for installing a microprocessor into the server's socket.
Steps for installing the optional Remote Supervisor Adapter II SlimLine.
Final steps required after installing hardware options and closing the server.
Instructions for reinstalling the server cover after component installation.
Illustrations and descriptions of server front and rear connectors for cabling.
Process for saving new hardware configuration settings after changes.
Identifies controls, LEDs, and connectors located on the server's front panel.
Identifies connectors and LEDs located on the server's rear panel.
Details how the server operates when connected to an AC power source.
Describes the methods and steps to power on the server.
Describes the methods and steps to power off the server.
Guide for using the ServerGuide CD to detect hardware and simplify OS installation.
Instructions for configuring redundant arrays of independent disks (RAID).
Details on using the ServeRAID utility for array configuration and management.
Instructions for using ServeRAID Manager for RAID controller configuration.
Steps to configure simple-swap SATA RAID using the Adaptec utility.
Utility to add RAID level-0 and level-1 functionality to integrated SATA controllers.
Instructions for performing an initial RAID level-1 configuration.
Overview of BMC utility for basic service-processor monitoring and remote management.
Steps to enable and configure Serial over LAN (SOL) for remote server management.
Procedures for updating and configuring BIOS for SOL connection.
Lists the available tools for diagnosing and solving hardware-related problems.
Explains POST beep codes which indicate detection of startup problems.
Lists abbreviated POST error codes and the recommended actions to resolve them.
Troubleshooting guidance for common issues encountered with ServerGuide.
Tables that list problem symptoms and suggest corrective actions.
Troubleshooting steps for issues related to the CD-RW/DVD drive.
General troubleshooting steps for common server issues.
Troubleshooting steps for issues related to hard disk drives.
Guidance for troubleshooting problems that occur occasionally and are difficult to diagnose.
Troubleshooting steps for issues with USB keyboards, mice, and pointing devices.
Troubleshooting steps for issues related to system memory modules (DIMMs).
Troubleshooting steps for issues related to the server's microprocessor.
Troubleshooting steps for display and monitor-related issues.
Troubleshooting steps for issues with installed optional devices.
Troubleshooting steps for issues related to the server's power supply.
Troubleshooting steps for issues related to serial ports and devices.
Troubleshooting steps for issues related to server software.
Troubleshooting steps for issues related to USB ports.
Troubleshooting steps for video output and display issues.
Explains how to use light path diagnostics for error identification.
Steps for diagnosing errors by viewing light path LEDs.
Lists LEDs on the light path panel, their meanings, and troubleshooting actions.
Steps to perform before contacting IBM support to solve problems.
Guidance on accessing and using the provided documentation and online help.
Resources for technical information and support available on the IBM website.
Information on obtaining IBM support for software-related issues.
Information on obtaining IBM support for hardware-related issues.
Contact information for IBM product service and support in Taiwan.
Lists trademarks of International Business Machines Corporation.
Clarifies definitions for processor speed, drive speeds, and storage capacity units.
Guidelines for responsible recycling and disposal of IT equipment.
Information on battery recycling, disposal, and return programs.
Statements regarding FCC, IC, EMC, and other electronic emission regulations.
