Need help?Do you have a question about the IBM System x3550 M4 and is the answer not in the manual?
General| Processor | Intel Xeon E5-2600 series |
|---|---|
| Chipset | Intel C600 series |
| Memory | Up to 768 GB |
| Storage | Up to 8 x 2.5" hot-swap drives |
| Form Factor | 1U rack |
| Power Supply | 750 W AC |
| Network Interface | 4 x 1 GbE |
| RAID Support | RAID 0, 1, 10 |
| Expansion Slots | 3 x PCIe 3.0 slots |
| Operating System Support | Windows Server, RHEL, SUSE, VMware |
| Management | Integrated Management Module II (IMM2) |
Read safety information before installing the product.
Summary of server features, specifications, and environmental compliance.
Overview of server physical components, controls, LEDs, and diagnostic panels.
Diagrams of system board connectors, switches, jumpers, and LEDs.
Safety, preparation, and guidelines for installing devices and working inside the server.
Instructions for installing hot-swap and simple-swap hard disk drives, including IDs.
Procedures for installing memory modules, DIMM sequences, and microprocessors.
Steps for installing PCI riser cards, adapters, and ServeRAID SAS/SATA controllers.
Instructions for installing power supplies, fans, network adapters, and USB devices.
Final steps for reassembly, cable connections, and configuration updates.
Overview of built-in configuration programs: Setup, Boot Manager, ServerGuide, IMM2.
Guide to using the UEFI Setup utility for viewing and changing system settings.
Configuring system settings, processors, memory, devices, power, and security.
Procedures for configuring RAID arrays and Ethernet controllers, including FoD.
To Next Page
