Need help?Do you have a question about the IBM System x3550 M3 Type 4254 and is the answer not in the manual?
General| Processor | Intel Xeon 5600 series |
|---|---|
| Max Processors | 2 |
| Memory | Up to 192 GB DDR3 |
| Form Factor | 1U Rack |
| Chipset | Intel 5520 |
| Drive Bays | Up to 4 hot-swap 2.5-inch SAS/SATA or SSD |
| RAID Support | RAID 0, 1, 10 |
| Network Interface | Dual-port Gigabit Ethernet |
| Power Supply | 460W or 675W |
| Expansion Slots | 2 PCIe 2.0 |
| Weight | Approximately 17.24 kg (38 lbs) |
| Memory Slots | 18 (RDIMM) or 12 (UDIMM) |
Provides caution and danger information used in the documentation, with cross-references to the Safety Information document.
Details the contents of the IBM Documentation CD, including PDF documents and the Documentation Browser.
Lists the minimum hardware and software required for the IBM Documentation CD.
Instructions on how to use the Documentation Browser to view and search documents on the CD.
Lists and describes other documentation that accompanies the server, available on the IBM Documentation CD.
Explains the types of notices (Note, Important, Attention, Caution, Danger) used in the manual.
Provides a summary of the server's features and technical specifications.
Details the server's features and technologies, including IMM, UEFI firmware, and DSA diagnostics.
Outlines the RAS features that ensure data integrity, server availability, and ease of problem diagnosis.
Describes IBM Systems Director as a tool for managing System x and xSeries servers.
Explains the UpdateXpress System Pack Installer for detecting and updating device drivers and firmware.
Covers server controls, LEDs, and how to turn the server on and off.
Illustrates and describes the controls, LEDs, and connectors on the front of the server.
Details the controls and LEDs on the operator information panel for server status.
Explains how to access and interpret the light path diagnostics panel for troubleshooting.
Describes system pulse LEDs on the system board for monitoring power-on, power-off sequencing, and boot progress.
Discusses server power features, including turning the server on and off.
Provides instructions on how to turn on the server, including automatic restart features.
Explains how to turn off the server, including considerations for power removal.
Additional steps for IBM Business Partners for installing optional hardware and completing server setup.
Provides methods for sending diagnostic data to IBM using the Enhanced Customer Data Repository.
Illustrates and identifies the major components of the server.
Shows the location of internal connectors on the system board.
Illustrates the external connectors located on the system board.
Details the location and function of system-board switches and jumpers.
Shows connectors for user-installable options on the system board.
Provides essential information and precautions before installing optional devices.
Lists requirements for ensuring proper system cooling and reliability.
Offers safety guidelines for performing tasks inside the server while it is powered on.
Provides instructions and precautions for handling static-sensitive devices to prevent damage.
Illustrates internal routing and connectors for SAS signal cables.
General notes and considerations for installing server drives.
Step-by-step guide for installing a 2.5-inch hot-swap SAS or SATA hard disk drive.
Shows the location of hot-swap drive IDs printed on the server's front.
Instructions for installing a 2.5-inch simple-swap SATA hard disk drive.
Identifies the location of simple-swap drive IDs on the server's front.
Provides instructions for installing an optional DVD drive in the server.
Detailed steps for removing and replacing a PCI riser-card assembly.
Guide for installing various types of adapters into the server's riser-card slots.
Instructions for replacing a PCI Express riser-card assembly with a PCI-X riser-card assembly.
Steps for replacing a PCI-X riser-card assembly with a PCI Express riser-card assembly.
Procedure for installing a ServeRAID SAS/SATA controller onto the SAS/SATA RAID riser card.
Guide for installing an optional ServeRAID adapter advanced feature key.
Instructions for installing an additional hot-swap fan assembly.
Steps for installing a hot-swap AC power supply into the server.
Guide for installing a USB embedded hypervisor flash device.
Instructions for installing the virtual media key.
Steps for installing an optional two-port Ethernet adapter.
Procedure for installing a RAID adapter battery remotely.
Guide for installing the DVD enablement kit for optical drive support.
Instructions for installing the IBM System x3550 M3 hot-swap SAS/SATA 4 Pac HDD option.
Detailed steps for installing a second microprocessor and its heat sink.
Information on replacing thermal grease after heat sink removal.
Final steps to complete the server installation after adding or removing components.
Procedure for installing the microprocessor 2 air baffle.
Instructions for installing the DIMM air baffle.
Steps for properly installing the server cover.
Illustrates the locations of input and output connectors for connecting cables.
Explains the process of updating server configuration after adding or removing devices.
Part of the BIOS firmware for changing settings like IRQ, startup sequence, date, and time.
Overrides startup sequence temporarily without changing Setup utility settings.
Manages server configuration, firmware updates, and remote network management.
Virtualization software available on servers with a USB embedded hypervisor flash device.
IMM features for remote access and capturing system state during hangs.
Steps to enable the remote presence feature by installing the virtual media key.
Instructions to find the IMM IP address via the Setup utility.
Procedure for logging into the IMM Web interface for remote presence functions.
Guide to starting the embedded hypervisor functions by adding the USB flash device to boot order.
Steps to recover the embedded hypervisor flash device image using the VMware Recovery CD.
How to enable/disable the Broadcom Gigabit Ethernet Utility program via Setup.
Details on configuring integrated Ethernet controllers and finding device drivers.
Program to configure and manage RAID arrays for SAS/SATA controllers.
Instructions on how to start the LSI Configuration Utility program.
Procedure for performing a low-level format on a hard disk drive.
Steps to create a RAID array of hard disk drives.
Alternative to Setup utility for modifying UEFI settings via command line.
Guidance on checking for and installing IBM Systems Director updates.
Steps to locate and install a newer version of IBM Systems Director.
Procedure for locating and installing updates when the management server is online.
Procedure for installing updates when the management server is offline.
Information on using UpdateXpress for device drivers and firmware updates.
Steps to take before contacting IBM support for assistance.
Information on accessing and using the product documentation, including online help and readme files.
Resources for obtaining up-to-date information about IBM products and support online.
Methods for sending diagnostic data to IBM via the Enhanced Customer Data Repository.
Guide to creating a personalized support page for tracking IBM products of interest.
Information on obtaining telephone assistance for software usage and problems.
Details on obtaining hardware service through IBM resellers or IBM Services.
Contact information for IBM Taiwan product service.
Lists trademarks of IBM and other companies relevant to the product.
Provides clarifications on terms like processor speed, drive speed, and data units (KB, MB, GB).
Details limits for particulates and gases to avoid device damage and malfunction.
Information on accessing publications in PDF format and requesting alternative formats.
Statement regarding country-specific certification for connecting to public telecommunication networks.
Contains regulatory statements for FCC, Industry Canada, Australia, New Zealand, EU EMC Directive, Germany, Japan, Korea, Russia, China, and Taiwan.
To Next Page
