IBM iSeries Series Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
7001 Temporary disk data error
A disk unit service action is recommended only if the Service Action Log
contains an entry for this reference code. For more information about the
Service Action Log, see “Hardware Service Manager” in the iSeries Service
Functions.
DISKDRV
7003 Device format error
If the disk has not been formatted by the system, initialize and format the
disk. See “Work with disk unit recovery” in the iSeries Service Functions.
7004 System log entry only, no service action required
7050 Data compression failure
Contact your next level of support.
SVCDOCS
7051 Compressed device and compression IOA are not compatible
The customer should perform the “Recovering From 6xxx7051 SRC”
procedure in the Backup and Recovery, SC41-5304-06.
CMPRES1
7052 Data compression warning
The customer should perform the “Recovering From 6xxx7052 SRC”
procedure in the Backup and Recovery, SC41-5304-06.
SVCDOCS
FFF2 Disk motor problem DISKDRV
FFF3 Disk media format bad DISKDRV
FFF4 Disk device problem DISKDRV
STORIOA
FFF5 Disk sector read error
A disk unit service action is recommended only if the Service Action Log
contains an entry for this reference code. For more information about the
Service Action Log, see “Hardware Service Manager” in the iSeries Service
Functions.
DISKDRV
FFF6 Disk device detected recoverable error
A disk unit service action is recommended only if the Service Action Log
contains an entry for this reference code. For more information about the
Service Action Log, see “Hardware Service Manager” in the iSeries Service
Functions.
DISKDRV
FFF7 Temporary disk data error
No action required. This reference code is logged for information only.
DISKDRV
FFF8 to FFF9 Temporary disk data error
A disk unit service action is recommended only if the Service Action Log
contains an entry for this reference code. For more information about the
Service Action Log, see “Hardware Service Manager” in the iSeries Service
Functions.
DISKDRV
FFFA Temporary disk bus error
A disk unit service action is recommended only if the Service Action Log
contains an entry for this reference code. For more information about the
Service Action Log, see “Hardware Service Manager” in the iSeries Service
Functions.
DISKDRV
STORIOA
FI01140
FI01141
BACKPLN
432x, 660x, 671x, 673x
System Reference Codes 173

IBM iSeries Series Specifications

General

Brand	IBM
Model	iSeries Series
Category	Server
Language	English