IBM iSeries Series Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
6C05 I/O card Licensed Internal Code error FI00730
AJDG301
6C0A Hardware detected failure FI00719
FI00718
7200 Communications Configuration CNGSLPT
7210 Resource or storage not available CNGMAXI
FI00730
7212 Procedure error in Licensed Internal Code AJDG301
FI00730
7C00 Asynchronous server program ended abnormally FI00730
7C02 Wrong command sent by Licensed Internal Code FI00730
7C03 Resource or storage not available CNGLOAD
FI00730
CNGDTRT
CNGECHO
CNGEORT
CNGPRTY
7C04 Wrong internal routing information FI00730
7C05, 7C09 Error in I/O card Licensed Internal Code FI00730
8011 IOP activation failed.
The MDMCNTRYID parameter in Network Attributes is not set. Use the
CHGNETA command to set MDMCNTRYID value.
CNGCONF
8013 IOP activation failed.
The MDMCNTRYID parameter in Network Attributes is not valid for this
adapter. Use the CHGNETA command to change MDMCNTRYID.
CNGCONF
8020 System log entry only, no service action required
FFFF User suspected communications problem. UNGUPPR
Table 2. Asynchronous Communications Failing Items Details
Failing Item Description Document Description
AJDG301 Licensed Internal Code Service Functions; APAR or LICTR
CNGASPT ACRSRCNAME value in CRTLINASC
command
Communications Configuration
CNGBCHR BITSCHAR value in CRTLINASC command Communications Configuration
CNGCLBR CALLNBR value in CRTLINASC command Communications Configuration
CNGCMOD CNN value in CRTLINASC command Communications Configuration
CNGCTSV CTSTMR value in CRTLINASC command Communications Configuration
CNGCTYP AUTOANS, AUTODIAL, DIALCMD, SWTCNN,
CNN in CRTLINASC
Communications Configuration
CNGDRTY DIALRTY value in CRTCTLASC command Communications Configuration
CNGDSRT DSRDRPTMR value in the CRTLINASC
command
Communications Configuration
CNGDTRT LINESPEED value in CRTLINASC command Communications Configuration
CNGECHO ECHO value in CRTLINASC command Communications Configuration
B003
System Reference Codes 207

IBM iSeries Series Specifications

General

Brand	IBM
Model	iSeries Series
Category	Server
Language	English