IBM NetVista Quick Reference

4. If you have the IBM Dual Wireless Receiver, connect the receiver into one
of the USB connectors at the rear of the computer. Arrange the IBM Rapid
Access III Wireless Keyboard and ScrollPoint Wireless mouse in a position
which will be comfortable for you.
5. Connect the monitor cable to the monitor connector, and tighten the
screws.
6. If you have a modem, connect the modem using the following
instructions.
L
IN
E
LINE
L
IN
E
LINE
P
H
O
N
E
PHONE
P
H
O
N
E
PHONE
L
I
N
E
LINE
P
H
O
N
E
PHONE
L
I
N
E
LINE
P
H
O
N
E
PHONE
1 Use this dual connection on the back of the computer to set up your modem.
2 Attach one end of the telephone cable to the telephone and the other end to the
telephone connector on the back of the computer. Attach one end of the modem
cable to the modem connector on the back of the computer and the other end to
the telephone outlet.
3 In some cases, a splitter or converter is required to attach the cables to the
telephone outlet, as shown at the top of this illustration. You can also use the
splitter without the telephone, as shown at the bottom of the illustration.
7. If you have audio devices, attach them using the following instructions.
For more detailed information about speakers, see steps 8 and 9 on page 7.
6 NetVista
™
: Quick Reference

IBM NetVista Specifications

General

Brand	IBM
Model	NetVista
Category	Desktop
Language	English