IBM PCjr - Page 369

Fuse-Filter Card/Power Cord Replacement
1454
1. Insert fuse-filter card into slot 0 in base cover.
2. Insertstrainrelief intoslot 0 inbase cover.
3. Install screw 0 intogroundterminal of power
cord.
4. Installscrew 0 in center of fuse-filter card.
5. Connecttransformer primary 0 to fuse-filter
card.
6. Replace safety shield onto fuse-filter card (1498).
7. Replace top cover (1434).
8. Replace access cover (1430).
9. Replace forms rack (1440).
Graphics Printer 4-1400-37