a. The system cooling fans are activated after approximately 30 seconds and begin to accelerate to
operating speed.
b. Progress indicators appear on the control panel display while the system is being started.
c. The power-on light on the control panel stops flashing and remains on, indicating that the system is
powered on.
For instructions, see Starting a system that is not managed by an HMC (www.ibm.com/support/
knowledgecenter/POWER10/p10haj/startsysnohmc.htm).
3. Install an operating system and update the operating system.
• Install the AIX operating system. For instructions, see Installing AIX (http://www.ibm.com/support/
knowledgecenter/POWER10/p10hdx/p10hdx_installaix.htm).
• Install the Linux operating system. For instructions, see Installing Linux (http://www.ibm.com/
support/knowledgecenter/POWER10/p10hdx/p10hdx_installlinux.htm).
• Install the VIOS operating system. For instructions, see Installing VIOS (https://www.ibm.com/
support/knowledgecenter/POWER10/p10hb1/p10hb1_vios_install.htm).
• Install the IBM i operating system. For instructions, see Installing the IBM i operating system (http://
www.ibm.com/support/knowledgecenter/POWER10/p10hdx/p10hdx_ibmi.htm).
12 Power Systems: Installing the IBM Power S1014 (9105-41B)
To Next Page
Loading...
