IBM Power System 9009-41G User Manual

Figure 85. Installing the service access cover
For a stand-alone system, complete the following steps. Refer to Figure 86 on page 90.
a. Slide the cover (B) on to the system unit as shown.
b. Close the latch release (A) by pushing it in the direction shown.
Control panel cables for the 9009-41A, 9009-42A, or 9223-42H
89

IBM Power System 9009-41G Specifications

General

Brand	IBM
Model	Power System 9009-41G
Category	Server
Language	English