DANGER: Multiple power cords. The product might be equipped with multiple AC power cords
or multiple DC power cables. To remove all hazardous voltages, disconnect all power cords and
power cables. (L003)
5. For a rack-mounted system, remove the front cover by pulling it away from the system.
The cover has indentations (A) where you can hold it more easily. See Figure 97 on page 102.
Figure 97. Removing the front cover
6. For a stand-alone system, remove the front cover and door by completing these steps.
a) Insert the front door key into the lock as shown in Figure 98 on page 103. Twist the key to the left
(counterclockwise) to unlock the door. Horizontal is locked; vertical is unlocked. Open the front
door.
102
Power Systems: Power Systems: Control panel
To Next Page
Loading...
Need help?
General