IBM Power System L922 Site And Hardware Planning

Figure 24. Model 9008-22L, 9009-22A, 9009-41A, 9009-42A, 9223-22H, and 9223-42H rear rack
clearance
For model 9040-MR9, you must have a minimum rear clearance of 246 mm (9.7 in.) or 280 mm (11.0
in.) depending on the type of rack bracket that is used during installation.
Figure 25. Model 9040-MR9 rear rack clearance
Site and hardware planning
73

IBM Power System L922 Specifications

General

Brand	IBM
Model	Power System L922
Category	Power Supply
Language	English