Figure 63. Replacing a memory module or ller
d) Press the memory module or ller straight down, rmly into the slot, until the locking tabs lock
into place.
e) Repeat “27.a” on page 63 through “27.d” on page 65 for the remaining memory modules and
llers.
28. Install the vital product data card in the new system backplane:
a) Align the VPD card in its slot in location P1-C13 on the new system backplane as shown in the
following gure.
Removing and replacing the system backplane in the 9009-41A, 9009-42A, or 9223-42H
65
To Next Page
Loading...
