IBM Proprinter

How to Change the Switch Settings
This section tells you how to change the printer switches
to meet your particular needs .
Warning: Always set the printer Power switch to (0)
before changing a switch.
What the Switches Do
Your printer has six switches that let you change six
different functions.
The switches determine how the printer operates when
you set the power switch On. You can change some of the
ways the printer operates, after you switch the power On,
by using escape codes. When you switch the printer
power Off , the printer cancels any functions set by
programming, earlier.
Switch Meaning ON OFF Factory
Number Setting
1
Beeper
No beep Beeps
OFF
when
when
the the
Paper Paper
Out Out
light is light is
on on
6-3